Products

Rain Harvesting

Services

1. AQUASLIM

The AQUASLIM is the narrowest tank available in market especially in premium sector. Its unique design and construction makes it visually discreet, attractive and easy to install. With its slim profile it gives the end user the advantage and ease of installation on narrow passages and along sidewalls of the house. It is an ideal choice for urban housing application where the yard spaces are not sacrificed.

PRODUCT FEATURES

• Food grade polyethylene construction

• UV stabilized material

• Durable and rigid design using interlocking baffles on the tanks body

• Large capacity (250 UK Gals.)

• Easy to install

• Available in different stone effect colors to suit landscape

AQUASLIM
L	2040	mm
W	365	mm
H	2045	mm
CAPACITY	250	UK GALS.
CAPACITY	1137	Liters

2. CYCLONE Filter

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

• Unique design that allows rainwater collection and coarse contaminants separation at the same time

• Easy installation from gutter to rainwater storage tank

• High water collection efficiency, over 90% of rainwater is collected

• Tough, durable and corrosion free construction

How it works:
•	Rain water with contaminants such as leaves and twigs from the roof enters the gutter downpipes through the filter’s inlet
•	Cyclone effect is created inside and channels the unwanted contaminants to be discharged at the center of the chamber at the same time the filtered water is collected at the lower part of the chamber via the filter mesh
•	The contaminants are flushed down through the drain pipe
•	Clean filtered rainwater free from contaminants is channeled to the first flush diverter of the storage tank

MODEL : RHF 200
A	442.5MM
B	590.0MM
Roof area of application	Up to 200 SQ. MTR.
Inlet/Outlet Ø	4in/102MM

3. RAINSAVER TANK

PE RAINWATER HARVESTING TANK

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

PRODUCT FEATURES

The PE RAINWATER HARVESTING TANK features a built in first flush diverter to prevent the initial 25 liters of rainwater run off containing fine debris from entering the tank. When the diverter is full, the ball float will float up, blocking the inlet to the diverter. Rainwater is thus diverted to the PE RAINWATER HARVESTING TANK. The first flush diverter will then reset itself by slowly draining off the initial rainwater and debris via the drainage pipeline, after which it will be empty and ready for next rainfall.

•	Clean rainwater (which has no contact with soil, dissolved salts and minerals) can be utilized as a water source for non-portable uses such as toilet flushing, laundry, general cleaning and garden watering.
•	Our PE RAINWATER HARVESTING TANK is produced using specially formulated polyethylene material to provide exceptional durability and maximum UV protection for outdoor use.
•	Manufactured as a single piece molding without any joints or welds through an advanced rotational molding process, the PE RAINWATERHARVESTING TANK is leak proof.